Blog — Page 2

Homes in Plano, Frisco, and much of Collin County deal with moderately hard water, and over a few years that mineral content is the leading cause of slow, cloudy, or foul-tasting ice — here's what actually helps.

An ice maker that's stopped producing usually comes down to a frozen or blocked water line, a failed inlet valve, or the ice maker's own shutoff arm stuck in the "off" position — check them in that order.

Heavy frost buildup inside a freezer almost always means warm, humid air is getting in more than it should — a worn door seal, frequent door openings, or a failed defrost system are the three usual suspects.

Chest freezers run simpler, more repair-friendly cooling systems and tend to need less frequent service, while upright freezers offer better organization but see more door seal and defrost system issues from constant vertical airflow loss.

Built-in and over-the-range microwaves are usually worth repairing ($80–$220), but affordable countertop models often aren't — replacement at $100–$250 frequently costs about the same as a repair on those lower-end units.

Gas ovens add igniter and gas valve components to the repair list beyond what electric ovens deal with, but both share the same door seal, sensor, and control board failure points that make up most other service calls in Dallas kitchens.

Uneven oven heat usually traces to a failing bake or broil element, a miscalibrated temperature sensor, or a warped door seal letting heat escape — here's how Dallas technicians narrow it down.

Standing water at the bottom of a dishwasher usually means a clogged filter, a kinked or clogged drain hose, or a failing drain pump — check them in that order since two of the three are free, five-minute fixes.

Cloudy, filmy glasses coming out of the dishwasher in Dallas are almost always hard-water mineral etching, not a dirty dishwasher — here's how to tell the difference and what actually fixes it.